RACING COMFORT
Cento1NDR is the new racing bicycle that joins the Wilier Triestina Endurance range. The geometries of the frame and the particular construction of the rear chainstays guarantee the cyclist a feeling of racing comfort: pure performance without having to give up comfort.
Staying in the saddle for a long time will be much less tiring: the rear triangle was sized and designed for maximum absorption of the stress generated on the vertical plane, usually caused by imperfections in the road surface. The transfer of pedal power is guaranteed with maximum efficiency thanks to a torsional stiffness comparable to racing frames.
As with the Cento10NDR, the Cento1NDR can also be equipped with direct mount type brake callipers or flat mount disc brakes.
| SIZE | C/C | L | H | A | H1 | L1 | A1 | REACH | STACK | WHEELBASE | |
| [cm] | [cm] | [cm] | [°] | [cm] | [cm] | [°] | [mm] | [mm] | [mm] | ||
| XS | 40,5 | 51,7 | 46,0 | 74,5 | 11,7 | 40,6 | 71,0 | 369 | 527 | 974 | |
| S | 43,5 | 53,2 | 49,0 | 74,0 | 13,6 | 40,6 | 71,5 | 374 | 546 | 982 | |
| M | 45,5 | 54,7 | 51,0 | 73,5 | 15,7 | 40,8 | 72,0 | 379 | 566 | 991 | |
| L | 47,5 | 55,8 | 53,0 | 73,5 | 17,7 | 40,8 | 72,5 | 384 | 586 | 998 | |
| XL | 50,5 | 57,4 | 56,0 | 73,0 | 19,6 | 41,1 | 72,5 | 389 | 604 | 1012 | |
| XXL | 53,5 | 59,2 | 59,0 | 72,5 | 21,7 | 41,1 | 72,5 | 395 | 625 | 1024 |
RACING COMFORT
We recommend cleaning with water and a soft cloth or sponge. Please note that some cleaning agents can damage the finish on the Cento1NDR. We do not recommend the use of pressurized water or air when cleaning the Cento1NDR frame. Such practices can damage the finish and bearings etc. Always thoroughly dry and lubricate your bicycle before storage.
The Cento1NDR can be used with any standard stem
and handlebar. If the frame is used with Wilier’s proprietary
Stemma/Barra or Alabarda cables and hoses will
be routed inside the handlebar/stem.
The Cento1NDR frame kit includes the frame, fork,
headset and seatpost.
We recommend that this operation is performed by
an official Wilier Triestina dealer. Conversion kits are
available.
With disc brakes the Cento1NDR uses a 12x100mm
front and 12 x 142mm rear hub. With direct mount
rim brakes, a 100mm QR front and 135mm QR rear
hub must be used. Please not that the thru axles and
QR skewers used on the Cento 1 NDR need to be the
correct length for safety reasons. We always recommend
using the proprietary Wilier thru axles and QR skewers
available from authorized Wilier Triestina dealers.
The metal brace is a structural component and should
not be removed when using either rim or disk brakes. It
helps to stiffen the rear end and removing it can result in
damage to the stays.
THE WEIGHT REFERS TO THE FRAME IN M SIZE WITH MATT FINISH. FOR OTHER COLORS, THE ADDITIONAL LAYERS OF COLOR AFFECT THE FINAL WEIGHT SO WE INVITE YOU TO CHECK THIS DIRECTLY AT AN AUTHORIZED WILIER TRIESTINA DEALER.
